Electrical Box for T8 LED lighting with Tombstone Connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a small box for a T8 LED lamp I was installing and couldn't find one anywhere that satisfied my requirements.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 642
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a small box for a T8 LED lamp I was installing and couldn't find one anywhere that satisfied my requirements.
I have designed this to work with ½" electrical fittings and the tombstone single pin T8 LED lamps. Cost to buy metal boxes to hold all of my shop lights are insane, so I built my own. The T8 LED single pin light is very affordable however, so I just printed the box to hold the tombstone and mounted them directly to the ceiling.
You can use PLA to prototype, but if you want flame retardant UL rated material you should use something like ABS or PEKK.
Included are boxes for you to create a series of lights connected at the end to a central box that then connects to a circuit/switch/panel.