CPAP & Cable Chain Mount EVA 2.4 Compatible
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fast and easy print to secure your CPAP tube and cable chain to the EVA 2.4 toolhead
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 635
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The main objective of this component is to get a perfect 90°-fold on the CPAP tube I use for part cooling. It also fits a cable chain mount on the side.
I tried to stick to the EVA 2.4 design language, using some sharp corners to avoid a fully circular shape.
The model can be printed WITHOUT SUPPORTS in around 30 minutes. I suggest at least 4 walls. The optimal print orientation can be found in the pictures. This orientation will also give you a very strong and flexible cable chain interface.
If your cable chain is on the other side, you can just use the mirror function in your slicers to get it right. I personally run mine in the mirrored configuration, as you can see in the pictures.
Component characteristics:
CPAP external diameter: 17.6mm
Cable chain interface spacing: 20.6mm (20mm+clearance)
This model is designed for the 15mm CPAP tube I own (Purdoux,15mm)
The file could need some modification on your side to fit your specific CPAP tube, so I shared the Fusion 360 parametric file to give you full control.
If you want to use a 7530 or 12032 fan with your CPAP, you could also find this model useful:
https://www.printables.com/model/498340-remote-cooling-fan-mounting-solution
If this has been helpful to you, saved you some time or some money, please consider supporting me with a tip trough Ko-fi.
https://ko-fi.com/addictivemanufacturing