CPAP & Cable Chain Mount EVA 2.4 Compatible
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fast and easy print to secure your CPAP tube and cable chain to the EVA 2.4 toolhead
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 52
- Makes
- 0
- Views
- 631
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
The main objective of this component is to get a perfect 90°-fold on the CPAP tube I use for part cooling. It also fits a cable chain mount on the side.
I tried to stick to the EVA 2.4 design language, using some sharp corners to avoid a fully circular shape.
The model can be printed WITHOUT SUPPORTS in around 30 minutes. I suggest at least 4 walls. The optimal print orientation can be found in the pictures. This orientation will also give you a very strong and flexible cable chain interface.
If your cable chain is on the other side, you can just use the mirror function in your slicers to get it right. I personally run mine in the mirrored configuration, as you can see in the pictures.
Component characteristics:
CPAP external diameter: 17.6mm
Cable chain interface spacing: 20.6mm (20mm+clearance)
This model is designed for the 15mm CPAP tube I own (Purdoux,15mm)
The file could need some modification on your side to fit your specific CPAP tube, so I shared the Fusion 360 parametric file to give you full control.
If you want to use a 7530 or 12032 fan with your CPAP, you could also find this model useful:
https://www.printables.com/model/498340-remote-cooling-fan-mounting-solution
If this has been helpful to you, saved you some time or some money, please consider supporting me with a tip trough Ko-fi.
https://ko-fi.com/addictivemanufacturing