Thread Snips (Sewing Scissors) Cover/Sheath with 福
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cover/sheath to protect the sharp end of thread snips, with the Chinese character "Fu" (福) embossed on it.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 538
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Thread snips, sewing scissors, Chinese scissors… whatever you choose to call them (they're pictured below), are quite useful. However, the ends are quite sharp and can puncture anything easily so a sheath was needed.
I found a cover that worked well, made by milous22 and available at Thingiverse. However, I wanted to add a little something to it, so redesigned it from the ground up, and then added an embossed 福, which is generally meant to signify fortune or good luck.
It's recommended you print vertically with adhesion support at 0.16-0.20 layer height. In the photos, I show it printed on an Elegoo Neptune 4 Plus with an 8mm brim and 0.20mm layer height in Elegoo Blue PLA. (Yes, I forgot to turn off the skirt.)