Liczymy pasujące modele…
Simple prints. I cut (with a small chisel) a slight notch on both sides of the original snips to allow the new clip to slide into place. The clip is direction both left-to-right and top-to-bottom.
A pegboard holder for Fiskars multipurpose snips
Pallet racking snips mount needed something for the racking i have so did a thing and here it is. racking as pictured
The thread Snips scissors (from Sew Tasty) does not come with a sheath, making it dangerous to keep in the bag or purse, so we made one. The scissors own spring makes sure it stays safely in the sheath. Prints fast and easy. Print…
Remixed this simple and effective tool holder to fit openGrid. Works with a variety of common flush cutters. The regular one works perfectly with my cheapo cutters from Amazon, but I also remixed the narrow version in case yours are…
New, Screw Wall, much stronger than the Honeycomb Wall https://www.printables.com/model/544779-screw-wall Honeycomb Wall Cutter DOUBLE! If you want the single version please see my other Honeycomb Wall STLs I have made several see below…
Keep your thread snips from stabbing everything in your drawer. These covers are simple—but the little details make a big difference. This improved version adds: Thumb and finger grips for better control Push blocks for easy one-handed…
Modeled to hold Wiss Tin Snips, forward, and left/right offset.
A grip for the locking clasp that stands up more for your thumb and makes it easier to lock and unlock the clasp. Simply super glue to clasp. I've printer with ABS.
This holder was designed to attach to a flat surface using either hot glue or using 3M mounting tape. I can confirm that you can use this with Knipex Super Snips 78-06-125, Knipex Super Snips 78-61-125 and the Creality Snips that comes…
A 2x1 Gridfinity bin to organise your 3d printing tools. Comfortably holds filament snips and bed scrapers. -Matt3D
The model has 3 perimeters 15% infill 0.25 layer height and printed in PLA i needed something that was going to keep my snips pliers and ipa bottle all in one place i put a slot on the side for my cleaning cloth i also have 2 different…
This is designed to protect your sewing or knitting items from your snips. It should fit any snips that look like these: https://amazon.com/UCEC-xiaoquan-Scissors-Portable-Embroidery/dp/B01986EQDI
Purpose-built screw-on holder for Fiskars 95003 snips commonly used by cable techs. Print upside down with no support, any material. The Fiskar snips appear to be out of production or unavailable. There are many clone lineman snips, I…
Also has a lip on the top if you want to stack something on top.
Design Concept This holder is designed specifically for organizing tools like cutters, snips, or pliers on the Ikea Skadis pegboard. It ensures your tools are easily accessible and neatly stored. Purpose The holder is perfect for…
Not sure if these things come in a standard size – I got these off of AliExpress. Created with the Fusion Gridfinity Generator plugin .
This is my take on a design to hold tools like pliers and snips on an Ikea pegboard. I did use similar existing models before but I found the following issues in the model I used: It wasn't very hefty. There was just a single bar, so…
The thread Snips scissors (from Sew Tasty) does not come with a sheath, making it dangerous to keep in the bag or purse, so we made one. The scissors own spring makes sure it stays safely in the sheath. Prints fast and easy. Print…
Remixed this simple and effective tool holder to fit openGrid. Works with a variety of common flush cutters. The regular one works perfectly with my cheapo cutters from Amazon, but I also remixed the narrow version in case yours are…
Replacement handles for Chinese snips usually sent with 3d printers Print 4 shells and 100% infill. No supports needed The one Identified with "C" is for the side that has the clip. I did have to heat that one up just a little to get it…
Immediately after printing Baggi0's Ender 3 tool holder (No Extra Screws needed), the hook for the snips broke off - so this is a quick and dirty fix to re-add a hook to the tool holder. The hook was taken from the original model, with…
Loved MartinDubois's clean design and thought DJHammy's remix of adding the snips portion was very clever, so decided to remix both to fit my needs. This will fit any 4040 V slot extrusion and will work on the right or left side of your…
First thing ever modeled. Just a hook for snips so they can hang in the enclosure.
This is my minimalist version of an Ender 3 Tool holder for the snips (aka filament cutters) — the tool I use most with my 3D printer. It holds the cutters handle-side up so they are easy to grab and close at hand. This uses the standard…
A hook with magnet above that connects to pegboards. Should work for many designs of snippers and pliers, but I designed it for Kobalt brand small wire snippers. This model uses my locking pegboard mount system for 1" standard pegboards.…
Simple holder for snips/pliers. Attaches to the wall with the M4 insert from the Honeycomb wall.
This is a push-on protective cover for the snips / cutters provided with most 3D printers. Will it fit your snips? If your snips have a central rivet that is 7mm on one side and 4mm the other side, then probably. The cover snaps into…
New, NEW Screw Wall! Check it out, its much stronger than the Honeycomb wall. https://www.printables.com/model/544779-screw-wall no support is needed, also I have one that holds TWO! Please check my other downloads for more great…
Was looking for a replace cover for my wire snips as I lost mine. Want it easy to print and small. Version 1 needs to be printed vertical with a Brim Version 2 printed on it side with the circle cut out on top, use support for only…
This design pairs well with my accessories organizer ( https://www.printables.com/model/214432-accessory-organizer-for-monoprice-delta-mini ) if you want to keep all the easy-to-lose tools accounted for. No supports required, just…
New, Screw Wall, much stronger than the Honeycomb Wall https://www.printables.com/model/544779-screw-wall Honeycomb Wall Cutter DOUBLE! If you want the single version please see my other Honeycomb Wall STLs I have made several see below…
Keep your snips handy. Small clip on carrier for side cutter snips. Fits 20mm extrusion. Print with support.
This is designed to protect your sewing or knitting items from your snips. It should fit any snips that look like these: https://amazon.com/UCEC-xiaoquan-Scissors-Portable-Embroidery/dp/B01986EQDI This is a remix of the original design…
I just added 6.5mm (i think😅) to the length of the hook so it accepts thicker snips.
Modified the mounting method so you can easily install and move the holder.
This is just a simple model to stick to the side of the printer enclosure with double sided tape. Print it with a brim as there is very limited contact with the build plate.
I wanted a version that would slip in to the “hollow” hole insert for the Honeycomb Wall Organizer so I could move things around more easily. This slips in snuggly so it won't slide out, but you can pull it out without too much trouble.…
I was inspired by a couple of the pegboard solutions that Ken226 made and decided to remix some of his designs to be used with other tools I want to mount to my pegboard. I was able to get this to print without supports however this my…
Snips Holder for Creality 3D Printer Enclosure for use on 16 mm diameter pole.
Pliers, snips and leatherman vertical tool storage. Two of the 6 bays are closed for Leatherman type tools that would otherwise slide all of the way out of the bay. Simply put your tools in the case, then when you transport it, hold it…
mine oryginal rubber grips fall apart so i design better one Please, share your print in the comments. Thank you!
Simple storage for filament snips that hang on to the top groove of the X-Smart 3.
After recently tidying up the area I came up with this basic design to keep the pliers / snips / cutters closed together so I could store them away easier and being quite clumsy not slice myself up with them haha. I am relatively new to…
This isn't the prettiest model, but it is functional enough to solve my issue. I didn't like that the Fiskars thread snips I use for sewing lay in an always open state, apparently newer models now have a closure mechanism. I designed this…
I have several of these snips and they work great… except the lock wears out overtime and they keep popping open. A quick run at a replacement part and here it is. I made it a bit snug and it works well. One end is flat so that it can…
A simple model to support a pair of filament cutters. You will require a small screw.
Gridfinity Holder tailored for Tonic Studios Tim Holtz Non-Stick Micro Serrated Mini Snips. This holder provides a snug home for your essential crafting tool. Contains magnet holes on the bottom and can be stacked.
Thread snips, sewing scissors, Chinese scissors… whatever you choose to call them (they're pictured below), are quite useful. However, the ends are quite sharp and can puncture anything easily so a sheath was needed. I found a cover that…
I found separate toolholders for this riser but wanted to save room, so I mashed them together into on holder.
An update on my singular bases I’ve decided to stop with these singular base uploads. They are getting so numerous it’s getting cluttered, it's difficult to find the one you want, and the uploading takes ages so I can’t do as many as I…
Keep your thread snips from stabbing everything in your drawer. These covers are simple—but the little details make a big difference. This improved version adds: Thumb and finger grips for better control Push blocks for easy one-handed…
– EN -- Mini Sewing Scissors Clipper (snips) case. Can be used with one hand, push the small ergo with your thumb to uncap. Can be printed in PLA, I've had mine for a few months. – FR -- Mini couvercle pour ciseau de couture coupe fil. Il…
Transform your snips into a safer, more convenient tool with my 3D printable cap/cover designed for long snips. Whether you're a hobbyist, gardener, or sewer, this handy accessory keeps your snips securely closed and covers the sharp…
The best way to store your snips! Made to work with my Long Snips Cover/Cap model, this model makes it effortless to store your snips on the wall. I've included everything needed to print the model in the STL. Check out the “ Long Snips…
Simple holder that fits on the handle of the snips keeping them together instead of open. it can also be used to hang the snips/cutters on a hook or pin. Feel free to build on it if you wish. I printed this myself with the pins and sides…
I was looking for a peg board holder for my snips that didn't leave the sharp ends exposed.
This is a replacement slide lock for use with Fiskars Softouch Micro-Tip Pruning Snips for use when the original gets brittle with age and breaks I used PETG which seems to work just fine, but other stiff materials may also be acceptable
