1 / 5
IKEA Lack Enclosure for 500x500x4mm Windows (removable) — zdjęcie 1
1 / 5

IKEA Lack Enclosure for 500x500x4mm Windows (removable)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A full set of prints for IKEA Lack enclosure with removable 500x500x4mm windows. -MK3S+ fits with Squash Feet-

Ocena
0 / 5
Polubienia
2
Pobrania
14
Wydruki
0
Wyświetlenia
227
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial
  • The feet raise the table up for a flush fit
  • Latches for closing the windows 
  • Hygrometer holder for information inside the chamber

You can remove every window anytime for ventilated printing or leave the top of the windows open with a slight angle. 

Ø x L: 3 x 16 mm woodscrews for the feet and the hygrometer holder

Ø x L: 3 x 25 mm woodscrews for the latch

Printed in PETG, no supports needed

 

I also used prints from other users for the Filament holder or the Sheet holder. 

 

 

 

Tagi