MODEL ROCKET ENGINE TEST STAND - S-BEAM LOAD CELL
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MODEL ROCKET ENGINE TEST STAND
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 36
- Wydruki
- 1
- Wyświetlenia
- 494
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- GNU General Public License v2.0
Test stand for rocket engines with a s-beam load cell configuration.
If you run a motor with ejection charge take necessary precautions..
Finishing:
Tolerances is fair but I recommend to sand contact surfaces and wipe with silicon.
Household aluminium foil as heat shield on the engine mount.
Zip ties or print your own fastener that fits your custom engine.
The engine mount stop pin is for shorter engine models.
My setup:
Raspberry pi zero 2w
Waveshare 4" inch HDMI
Load cell 50kg
https://www.amazon.se/dp/B077YLHG9D?ref=ppx_yo2ov_dt_b_product_details&th=1
HX711 load cell amplifier
https://www.amazon.se/dp/B07GT2HYFJ?psc=1&ref=ppx_yo2ov_dt_b_product_details
M10 Hex bolt 30mm 2x
My printer settings:
Nossle 0.6
Speed 80MM/S
Layer height 0.24 (0.30)
Support ZigZag
Infill 20%
Klipper
Cura
Feel free to contact me if you have any questions, and please upload your makes.
Have a kick ass day!
//Firefly