IoT 20mm rails for 3030 T-Nuts and 2020 extruded aluminium accessories
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extruded aluminum rails sized 20mm or 22mm but compatible with 3030 T-Nuts and 2020 accessories.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 376
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- GNU General Public License v2.0
The classic 3030 is too large for IoT projects, and the 2020 T-Nuts are too frail when printed. These 20mm by 20mm and 22mm by 22mm extrusions are compatible with 3030 T-Nuts and 2020 accessories, but are smaller in size than the 3030 originals and they fit T-nuts with M4 nuts and screws, which classic 2020 rails wouldn't.
Print tall rails with a brim. A 5mm brim is sufficient for 220mm tall pieces if you print slowly, otherwise increase the brim to at least 10mm. I wasn't able to print 220mm tall with the default MK4IS speeds.
Print T-Nuts with supports on the build plate.
Use the 2222 rails if you expect strength, you may tighten the T-Nuts as much as needed, they won't bend. The 20mm ones bend under tension.
I use 2222 rails with 3030 T-Nuts with M4 screws and nuts and they don't break when tightened.