IoT 20mm rails for 3030 T-Nuts and 2020 extruded aluminium accessories
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extruded aluminum rails sized 20mm or 22mm but compatible with 3030 T-Nuts and 2020 accessories.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 34
- Makes
- 0
- Views
- 376
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- GNU General Public License v2.0
The classic 3030 is too large for IoT projects, and the 2020 T-Nuts are too frail when printed. These 20mm by 20mm and 22mm by 22mm extrusions are compatible with 3030 T-Nuts and 2020 accessories, but are smaller in size than the 3030 originals and they fit T-nuts with M4 nuts and screws, which classic 2020 rails wouldn't.
Print tall rails with a brim. A 5mm brim is sufficient for 220mm tall pieces if you print slowly, otherwise increase the brim to at least 10mm. I wasn't able to print 220mm tall with the default MK4IS speeds.
Print T-Nuts with supports on the build plate.
Use the 2222 rails if you expect strength, you may tighten the T-Nuts as much as needed, they won't bend. The 20mm ones bend under tension.
I use 2222 rails with 3030 T-Nuts with M4 screws and nuts and they don't break when tightened.