1 / 2
Printable M3 T-Nut for 3030 Extrusion (Prusa XL) — zdjęcie 1
1 / 2

Printable M3 T-Nut for 3030 Extrusion (Prusa XL)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Printable T-Nut for 3030/ Prusa XL extrusions for attaching whatever your heard desires :)

Ocena
5 / 5
Polubienia
101
Pobrania
462
Wydruki
13
Wyświetlenia
1828
Oceny
12

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Here are 3 Versions of T-Nut:

"M3_heat-set_insert_T-Nut_3030_(4mm_hole)" is for M3 Brass Heatset Inserts - Short (ruthex or cnckitchen) 

“M3_heat-set_insert_T-Nut_3030_(4.6mm_hole)” is for M3 Brass Heatset Inserts - Short M3x5x4 (Voron standard)

“M3_hex_nut_T-Nut_3030” is for standart M3 hex nuts with 5.5mm key-width

 

The thing which hold the nut in place has to be prebend (see video below). That leads to some stressmarks. This stressmarks are not critical.

How to insert the printed version in the slot of the extrusions:

 

Print recommendations:

Material: ABS (other might work just what i tested)
Perimeters: ~1.6mm (4 @ .4 Nozzle; 3 @ .6 Nozzle)
Top/Bottom: ~1mm
Infill: 30-40%
Extrusion width: External perimeters: .5mm

There where complanes about loose fit with PETG. Scale them down in Z to 97% to get a tight fit or add a bit of glue. ;)

Feel free to Modify it yourself. CAD-models are attached.

Tagi