Samsung TV Q60R Universal soundbar adapter mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
2,69 € – 3,28 € netto (bez VAT)
Dla pliku: Q60 Adapter.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 2,98 € netto (środek widełek).
- Masa podana przez autora
- 37 g
- Czas druku podany przez autora
- 3 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
A universal adapter with M8 threaded mounting holes for mounting soundbar etc. Uses feet mounting points.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 413
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
This adapter goes in place of the factory supplied stand/feet for the TV. In my case I wanted to mount the soundbar under the TV and the hardware I had wasn't optimal.
Remove the feet and bolt on these adapters. There are M8 mounting holes, threaded, so you can have a very sturdy mounting point for sound bar or anything else. Use the screws that come with the original feet to mount the adapter to the TV.
Note, in photo Silver bracket is this version. Red bracket was earlier version.
