Handle for flattened collets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified the handle to securely hold b3n3d1k7's Collets for Tap Holder, which are indeed easier to print and stronger.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 44
- Wydruki
- 1
- Wyświetlenia
- 230
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Designed to fit these collets. The square hole at the bottom serves as both a way to hang the handle and as access for a screwdriver or other tool to help pop out stuck collets.
Printed in PETG at 0.25mm layer height and 3 perimeters. Mostly 15% infill, but I added a modifier along the section of the handle where the collet sits to be 100% infill for added torque strength. No supports needed.
The included .3mf file is for the MK3.9.
The included .scad file needs the original handle.stl
Update Dec. 15, 2024: By request, I have also added the collets that are shown in the pictures. I generated these using the OpenSCAD file created by b3n3d1k7. The sizes are in the file names and are summarized here:
- 1/4" hexagon
- 1/8" hexagon
- 1/4" square
- 1/8" square
- 6, 5, 4, and 3 mm square