Handle for flattened collets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified the handle to securely hold b3n3d1k7's Collets for Tap Holder, which are indeed easier to print and stronger.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 44
- Makes
- 1
- Views
- 230
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Designed to fit these collets. The square hole at the bottom serves as both a way to hang the handle and as access for a screwdriver or other tool to help pop out stuck collets.
Printed in PETG at 0.25mm layer height and 3 perimeters. Mostly 15% infill, but I added a modifier along the section of the handle where the collet sits to be 100% infill for added torque strength. No supports needed.
The included .3mf file is for the MK3.9.
The included .scad file needs the original handle.stl
Update Dec. 15, 2024: By request, I have also added the collets that are shown in the pictures. I generated these using the OpenSCAD file created by b3n3d1k7. The sizes are in the file names and are summarized here:
- 1/4" hexagon
- 1/8" hexagon
- 1/4" square
- 1/8" square
- 6, 5, 4, and 3 mm square