1 / 8
Parker IM Pen Protective Box with Magnetic Closure
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Box for Parker IM ballpoint pen. And it does have magnets :D
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 570
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
Parker Pen Protective Box with Magnetic Closure
Design Features:
- Magnetic Closure Mechanism: Incorporates strategically placed magnets for secure closure, with a unique feature allowing the top part to magnetically slide and stay open.
- Compact and Durable: Engineered to be small for portability, yet robust enough to safeguard your pen. It includes rubber inserts specifically tailored for the Parker IM ballpoint pen, offering enhanced protection. Plans for additional designs to accommodate different pen models are underway.
3D Printing Instructions:
Materials for Inserts:
- Primary Recommendation: TPU or TPE
- Alternative Option: PLA or PETG can be used, though these materials will result in a harder finish.
Inserts:
- Printing: Utilize a low infill percentage (around 10%) and a minimal number of top and bottom layers (2-3 layers recommended) and at least 0,15 mm layer height.
- Assembly: Once printed, securely glue the inserts into their respective positions in the box and lid.
Box and Lid:
- Materials: PETG, PLA , ASA, or ABS
- Printing: at least 0,15 mm layer height.
Magnets:
- Type: Ten round neodymium magnets, size 6x3 mm.
- Temperature Rating: Minimum of 85 degrees Celsius to prevent damage during printing.
- Installation: Pause the gcode print at specific heights (7.2 mm and 14.3 mm for the Box; 5 mm for the Lid) to insert magnets. Ensure a snug fit, being cautious not to disrupt the print. Pay attention to magnet polarity; mark the North side for consistent orientation (upwards on the Box, downwards on the Lid, and outward on the side of Box).
I have added .gcode files, however I do recommend slicing it on your own, so you can have the best settings possible.
Final Note: This pen box has been meticulously designed for both functionality and aesthetics. It combines innovative magnetic features with the durability and protection essential for pen storage. Whether you choose a soft or hard material, this design ensures your Parker pen is well-protected and stylishly presented.
Wishing you a successful and enjoyable printing experience!