1 / 4
Below raiser for the Creality K1 (not for the K1 Max) — zdjęcie 1
1 / 4

Below raiser for the Creality K1 (not for the K1 Max)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Below raiser for the Creality K1 to avoid things get under the machine and improve the below ventilation

Ocena
0 / 5
Polubienia
61
Pobrania
154
Wydruki
0
Wyświetlenia
2849
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Below raiser for the Creality K1 to avoid things get under the machine, improve the general support and improve the below ventilation

Not suitable for the K1 Max due that I don't own it.

You have the full version if you own a 400*400 heatbed size so you save 8 screws plus nuts and o-rings

DANGER: Beware when moving the machine. If you need to move it, I suggest to remove the below raiser.

Things that you need:

  • 4 x M3 x 10 mm
  • 4x M4 X 18 mm plus M4 inserts

If you don't have a huge printer and you print the four parts:

  • 8 x M3 x 20 mm (plus nuts and o-rings)

HOW TO INSTALL IT:

If you printed the four parts:

First, use a soldering iron to insert the M4 inserts in each corner to attach the adapters plus the silicone pads.

Join with the 8 x M3 x 20 mm (plus nuts and o-rings) before puting into the machine.

Once done or you printed the full version on a huge heatbed printer, use the M3 x 10 mm to attach to the machine on each corner.

Finally attach, using the adapters (adaptadores.stl) and the silicone pads, with the M4 x 18 mm screws

Turn over, carefully, the 3d printer and enjoy it.

Disclaimer: If you want a drawer, will be available soon.

For K1 Max, I don't own one… So I don't know where are the two grounds screws attached. Feel free to design it.

Donations through Paypal

Tagi