FIXDRY Wall Shelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Relocate your FIXDRY Filament Dryer to the wall so you can use your desktop space for better things!
- Ocena
- 3 / 5
- Polubienia
- 9
- Pobrania
- 50
- Wydruki
- 1
- Wyświetlenia
- 469
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v2.0
You'll want to print this in the orientation that the model sits when imported. It puts the layer lines in a favorable direction for the force be applied. You do not need any supports to print this. This will fit on your “standard” 220mm bed.
I used hot-glue to secure the tabs to the shelf.
Use at your own risk as I don't claim any responsibility for failure. It has done great for me and with my testing. I used 12% adaptive infill with 4 walls and printed at a .2 layer height with great results.
Make sure you upload and post your makes so I can see how it works for you and your setup!