1 / 3
BIQU H2 V2S Revo - Fokoos Odin5 F3 - Linear Rails
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hotend/Extruder:BIQU H2 V2S Revo - Printer:Fokoos Odin5 F3, MGN12H Linear rail - Probe:Bltouch - Part cooling:5015fan
- Ocena
- 0 / 5
- Polubienia
- 9
- Wydruki
- 0
- Wyświetlenia
- 565
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
SzczegółyPliki (9)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (16)Powiązane
- Currently Untested -
i don't have one so if there are any issues please contact me! ( this was a request but the person didn't end up getting the revo model )
- Requires a minimum of 15 heat inserts: M3x4mm long, either 4.6 or 5mm outer diameter
- Needed screws are mostly M3x6 and M3x8, with a couple M3x20
- MGN12H top mounted
- X motor cover to relocate the endstop
- Probe offset: X -24, Y -29.4
No print support needed!!
Feb 6, 2023: updated the side braces
Feb 23, 2023: updated fan_mount_bltouch_mount (didn't realize there was a gear that stuck out, added a cut for it)