1 / 1
FM radio kit HEX3653 ABRA AK-270
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Radio bracket
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 568
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Small bracket to hold radio kit behind the battery box.
Use glue to hold in place. I used epoxy.
radio kit is the ABRA-Electronics AK-270, which is based on HEX3653 IC. Link below has a datasheet about it.
https://abra-electronics.com/educational-kits-trainers/educational-kits/radio-kits/ak-270-hex3653-fm-radio-receiver-module-d.i.y.-kit.html
This same kit sells on eBays and such for few euros.
If those spikes don't align with your PCB, you can split the part in Slic3r and nudge them around.