Miniatures Holding Plate for Multiboard Push-Fit Shelf (Magnetized)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Plate with embeds for 5mm x 1mm magnets to hold your minis that fits into the biggest Multiboard push-fit shelf.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 1180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution
This is a thin plate that has holes at the bottom where you can fit 3 or 4 5mm magnets to hold your miniatures. Plate has exact size of Multiboard 7 Multiholes, Push-Fit Shelf. Size of this shelf allows to display up to 4 miniatures on standard warhammer base with maximum size of 40mm. Although you won't be able to use 4 holes variant for 4 bases of 40mm diameter.
It's done to work with my magnet filled base fillings. Just remember - always make sure that your magnet orientation is correct.
Holes for magnets are tight fit, but you can use simple tape or glue - holes are at the bottom side and therefor invisible when placed on shelf. In any case magnet placement does not have to be final - if you want to change orientation for example.
Print:
0.2mm, no supports needed