10mm Round Magnet Applicator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Used for gluing magnets with the right polarity.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 524
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Need something to hold magnets while glueing a large project together and need polarity to be correct. Found this one and resized it to 10mm.
Will hold a 10x2mm round magnet. Shorten the rod for thicker magnets.
Used manual tree supports for the inside of the case.
I printed with .6 nozzle at .42.
Made a red version for one polarity and a black for the other.
Added a piece of heat shrink to the end so that it was a little more snug fit.
Original designer also used Ferrules Rubber End Caps on the end to aid in glueing. I ordered some from Amazon but they have not arrived yet to try.