Audio-Technica AT-VM95E Turntable Cartridge Shell
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement shell/protective cover for an AT-VM95E cartridge.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 159
- Wydruki
- 2
- Wyświetlenia
- 957
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently replaced the cartridge on my turntable and took the opportunity to model a replacement cartridge cover for the new one before I have a chance to lose it. I've tested this to fit over Audio-Technica's AT-VM95E cartridge snugly, without contacting the stylus. It may fit on other Audio-Technical carts as well, but I haven't tested any others. I've included the STEP model in case you need to fine-tune the dimensions for a different cartridge.
I did not have to use a brim for my print, but it may help depending on your printer, build plate, and ambient temperature. I had a bit of stringing on the inside that I solved by quickly passing the part over a flame.