IKEA Kallax Hider
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
4 plates combined to one big plate which fits into IKEA Kallax to hide the backside and protect against dust
- Ocena
- 4,833 / 5
- Polubienia
- 261
- Pobrania
- 634
- Wydruki
- 6
- Wyświetlenia
- 14 453
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this IKEA Kallax Hider for hiding the view from the backside of my IKEA Kallax. It prevents seeing the backside from books, folders and helps to collect less dust in these compartments. :)
To build you will need to print:
4xplate - 2h 30m each
4xcorner clamp - 3min each
1xcenter clamp - 5min each
I measured 33.5cm x 33.5cm for my compartment of my IKEA Kallax. If you have slightly bigger or smaller ones, just scale it for your desired size. One plate is 16.75cm x 16.75cm.
The clamps should be very tight. You can connect the parts with the clamps by using softly a hammer
Print Settings:
layer-height: 0.3mm
to print it faster I used:
infill: 5%
fill-pattern: grid
solid-layer-top: 3
solid-layer-bottom:2
you can print the clamps without infill :)