Lowered Y axis motor mount for Ender3 V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lowers and rotates Y axis motor mount on an Ender 3 v2 Requires removal of the metal plate. Includes limit switch mount
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 655
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This mount rotates the Y axis motor and lowers it.
I have also included a mount so you can move your Y limit switch.
Allows use of a larger motor with a heatsink or even a fan.
Should fit any printer with a similar Y axis on a 4040 extrusion.
This requires you to remove the rear metal plate on an Ender 3 v2, so probably only suitable if you've already moved your PSU somewhere else (mine are all external as I have an enclosure).
The closed loop belt is 69 teeth (138mm), but I feel that you can use a 68 tooth without issue.
The metal bar is 62ish mm long and 8mm diameter.
All pulleys are 2GT 20 tooth. The motor pulley is 5mm diameter and the 2 on the metal bar are 8mm.
The motor can be a little tricky to slide into the slot, it's best to remove the drive pulley from the motor to make this easier.
This is all drawn and measured and built from scratch, but the design is heavily influenced (and in places outright copied from) by the motor holder on Kevinakasam's belt driven ender mod (see here: https://kevinakasam.com/).
STEP files only as most slicers can handle these directly.
The (combined) files contain the models as assembled so you can see what's what.