Liczymy pasujące modele…
🌟 Unleash Comfort: Radiomaster Pocket Gimbal Spacer Installation! 🌟 Ahoy, fellow aviators! Since embracing the Radiomaster Pocket, I've been soaring through the skies with joy. However, a tiny hiccup emerged – the thumb position felt a…
The base was too high. I didn't want the filament under the printer. So I "cut off" the base without further ado. (approx 32 mm) The building instructions are basically the same as those shown in the blog.…
VT Lowered Z Motor Mounts CHANGELOG 01.12.2022: Initial release, refere to description.. Description: Since i wanted a full 350mm cubed Trident i had to go with regular Nema17 steppers with loose leadscrews and couplers. That meant i had…
The original one of these touched the silicone sock on my Ender 3. I lowered it a little bit so that its just about .5mm above the nozzle. This keeps it away from the sock totally and puts it a bit closer to perfect aim on my printer.…
You can use this model if you don't want to cut springs or trying to find another spring i added extra 2.5 mm room to reduce spring tension on bearing you can use PLA if you dont increase temperature too much for ABS like materials. Ofc…
Lowered platform for Nespresso Inissia to use larger coffee cups. Remove original flippable platform and put this line in place. Contains spilled water container. Pictures show dotted layer. That was a design fault. Corrected the attached…
I lowered the canvas and created a riser that puts the height around 670mm including handle similarly to the CC2 Emoji. The top spool brackets are lowered and the rear bracket has a shield to protect the canvas cable when swapping spools.…
This is a 200mm tall version of MU74NT's original design. I cut the ptfe tubes back 70mm and still had issues with the lines trying to push the glass off the top of the original riser. Figured while I was at it, I may as well update this…
Changed it a little bit so it's flat at the back with not supports needed
Hi all. I reworked the model to match my Voron 2.4 350 from Siboor (which includes a 3D cartographer). I provide you with the STL files as well as the Fusion360 files to modify if necessary. I also provide you with the corresponding…
Printed as shown in the file, no supports necessary. Printed at 45° orientation on the bed for faster printing. Esun clear petg with 240° nozzle and 80° bed. Fits stock mounting holes perfectly and uses the same screws. *I have my printer…
Printed with 0.2mm layer height, no raft or supports.
I wanted to equip my TS100 Case with the inserts from jamie xu and Char to accommodate both my desoldering pump and my CNC Kitchen Heatset. Unfortunately, the TS100 collides with the stand holder due to the customisation of Char , so that…
No supports needed!
Two M5 bolts fasten the 2020 frame to the 2040, with a third M5x8 and an M5 roll-in T-Nut. I had to tap a thread in the 2020 extrusion center.
Stealthburner x carraige with lowered probe suit Rapido UHF and Omron or Eddy probe. Larger hole for x stop wiring/plug.
Print Prusamanent Galaxy Black 0,2mm structural infil 20% pattern gyroid bridges fan speed 70% Be careful with the cables when assembling. I did the disassembly and assembly with the printer on its side, I did not remove the metal display…
Just a small model of my Hyundai i30N. Will be updated and repaired for being a keychain.
This remix of the original lowers the Revo6 or V6 Hotend by about 2mm and adds the E3D logo to the outside of the model. I printed with a 0.25mm nozzle for the best quality. Any material should work, but I printed with PETG
Adjusted a few issues I found with the original model and lowered to be more in line with a standard length MK8 nozzle instead of the shorter Sovol nozzles. Prints without support. 2.5mm model in picture
A lowered version of motor mount for MST TCR rc car
It's like the original Lenovo Tiny Fan Shroud just with fixed mounting positins
This is a remix of the original mmu3 frame holder in order to gain slightly more overhead clearance above mmu3 body. The selector is partially hidden behind the selector, but still can freely move to both ends. I don't remember the…
I had problems aligning my sheet with the base file. This remix allows you to add a screw to block the sheet and add guidance so that the pieces auto align with the 2020 profile
Original Ender KE LCD mount lowered
So the original model has the support piece a bit higher, which can interfere with PCB Klicky. This fixes it. Move the metal support rod around 10mm down!
I Remixed it and lowered the position of camera in order to get a better view of the nozzle.(No Logo)
This mount rotates the Y axis motor and lowers it. I have also included a mount so you can move your Y limit switch. Allows use of a larger motor with a heatsink or even a fan. Should fit any printer with a similar Y axis on a 4040…
WPL C24 lowered bumper mounts, use a B-Series Bumper or something custom, mounts using stock crossmember screws.
I modded this as the webcam I was using had the sensor higher than the Logitech the author originally used. I modded to lower it and align it with the nozzle. Thanks to the original author for your awesome design
Handbrake cover for Transporter T6.1 with lowered handbrake (THQ bracket) https://www.ebay.co.uk/itm/374553790202
K1C display mount that allows the screen to be lowered enough for a full size door without the odd cutout. The mount can also be swapped or removed without disconnecting the display cable.
Lowered the connector so it can reach further down and cover my ears better. I uploaded the fusion file for remix because it sucks converting from stl. I printed in PETG at 15% with tree supports. A couple parts are not easy to remove but…
Folding brace that is lowered by 1 inch for better eye line. 2 models exist - LEFT or RIGHT folding option! As noted in the pics, it may cover the grip and trigger, so the alternate folding may be preferred if you are right- or…
This remix lowers the klicky mount point so the nozzle isn't so close to the bed while probing.
I originally used a similar one but that lead to a Crash of my Cartographer Probe with the Scrubber so I made these that are significant lower and include a Stopper for Build Sheet Alignment. [gcode_macro CLEAN_NOZZLE] variable_start_x:…
Just a quick remix, as described, for the heated filament drybox
Volvo 240 Wagon (245) Wall Art with Tires and lowered look
Another Satsana mix that uses 2x 4010 blowers. the 4010 front fan was shifted down to blow on the bottom of the heatsink removed some material from the back to easily remove the Satsana without dismounting the heatsink the mounting holes…
When I got this part done, I was doing full build plates and kept having issues in the top right corner. Turns out the design with default heat bed connector collides and lowers the bed. This fixes that and also adds a hex nut to the…
I lowered the plug on the back from the middle to the bottom. This is only for the Sticky_Note_Z_76mm.stl You will need wall supports for the first layer only, as I lowered the plug to one layer off the plate for my aesthetic choice. You…
I converted my Spool Tank from the detachable PTFE tubing first original design, to the permanent tubing, using the bigger PTFE tubing and also using the intake attachments that are vertical allowing the PTFE tube to run straight down. I…
Original mount was too high for the H2 Revo and caused the nozzle to crash into the bed. I Lowered the mount for the BL Touch by 4mm to fix this. Printed in ABS, but ASA may be better if you actively heat your chamber. Offsets X= 37.5 Y=…
i've printed it in PETG, but depends on the preferences. 0.2 with 15% infill and is sturdy as hell. it's a bit tricky to tighten the side screw, but not impossible.
When I printed parts directly from BOM (toolhead_hotend_spiderV3.stl and toolhead_fanduct_4020_S.stl), the nozzle was at the same height as the lower part of the funduct, so I either had to add washers to the hotend mounts or remix the…
This remix allows the use of the protector with Radiomaster Pocket Gimbal Spacer Lowered Gimbals mod installed.
Saeco aroma, original sized tray but lowered grill to accomodate larger coffee cup
Baby Orangutan in a Flowered Hat - Hueforge Sized so you can print the frame on a standard sized printer. See frame recommendation below. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is…
You need 2 M3 40mm and 2 M3 5mm screws. Print it in ABS or ASA at 100% infill. Make sure to have your supports tuned or youll find yourself drilling the 35mm holes. The supports released perfectly fine for me.
lowered supports for MSI MAG Forge 100M case, those are approximately half tall than original ones, perfect fit
Fanmount for the orbiter ender carriage but lowered by 5.5mm to accommodate Rapido
Trying to level your lowered Tesla? Here's a fun tool to tell you how even the wheel spacing is on your Tesla. Although you can probably use this tool without it, having a spare wheel cover to steal the spring wire from, helps hold it in…
Print using PETG/ASA/ABS. No overhangs required. Use original screws from SV06 screen
I designed this adaptor for Centauri Carbon with CANVAS upgrade which using "CC1 TOP COVER 172MM TALL" After install this adaptor, you can load the filament to the spool No.4 as usual. Required: Screw M2.6 x6mm 3pcs
Nothing special to add, just print without any support or special settings. Please leave a like and comment if you liked the model :)
Fits standard coffee mugs, tumblers, and other cups. Use spacers or command strips to make it more secure. Print at 20% infill with supports
Here I made a modification to a Canvas riser I liked made by another creator. it's nearly the same size as the emoji edition CC2 but made for the CC1. I made this addition so I can still print TPU without going through the canvas unit. I…
I wanted ThePirer's bed holder to sit a little lower so I extended the bottom edge by 40mm.
A lowered X carriage, allowing the toolhead to be mounted closer to the bed. The mounting points for the linear rail are NOT changed, and only the toolhead mounting points have been adjusted. Print in ABS/ASA for best results. Hardware…
Remixed to be able to lower the height of the Proto25, because I use a AIO FC and a Walksnail V2 VTX (Thinner than O4 Pro) From 28mm standoff , cut down to 23mm. The new height of 23mm is the same as the GPS,RX and antenna mount combined.…
The fit is like a similar item designed for PLAYMOBIL.
goose117's original wasn't low enough, or close enough to the nozzle for me, so I modified it. I printed the example at high speed just to make sure it fit, intending to do it solid and slower (and not purple), but it worked so I am just…
Shackle spacers to fit a stock length T-100 pickup shackle for use on a Mazda B2200 pickup using the Belltech lowering springs. These springs are longer than the stock Mazda springs and thus cause the spring shackle to contact the frame.…
Thicc Skirts – Lowered Variants for Clicky‑Clack door on 350mm. These are small‑tweak variants of the Thicc Skirts for the Voron Clicky‑Clack door system. The top surface of the skirts is lowered by 1 mm or 2 mm to provide a bit more…
I found the default seat height for the Sereed balance bike to be too high for my daughter, so I modified the head tube and lowered the insertion point of the top tube relative to the steering stem. This drops the height of the seat from…
I remixed the Thicc Clicky Clack front skirt for 350mm to provide additional door clearance, and I’ve also modified this screen mount to ensure proper fitment while preserving the original design language. You’re welcome to check out my…
This remix allows the use of the protector with Radiomaster Pocket Gimbal Spacer Lowered Gimbals mod installed.
I lowered the plug on the back from the middle to the bottom. This is only for the Sticky_Note_Z_76mm.stl You will need wall supports for the first layer only, as I lowered the plug to one layer off the plate for my aesthetic choice. You…
![[CC1] Lowered Canvas Remix (originally made by MU74NT) for TPU Conversion](https://media.printables.com/media/prints/cf3f208e-2586-40bc-b8e1-e34b09953f5e/images/13135792_7f5bf317-7c3d-46f8-b4e4-8ba2d74e7d49_09d70bf9-0516-4c40-a91d-a43219a0dad7/screenshot-2026-06-13-142351.png)
