1 / 8
Fan grill for 360mm - Desktop AIO Water Cooler — zdjęcie 1
1 / 8

Fan grill for 360mm - Desktop AIO Water Cooler

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a cover for a 360mm set of cooling fans (3x 120mm fan). Can be used to cover a 360mm Water Cooler block fans.

Ocena
0 / 5
Polubienia
6
Pobrania
81
Wydruki
0
Wyświetlenia
872
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a cover for a set of 3 120mm fans (360mm) as seen in the pictures. I made it specifically for my case but it will work on any 360mm fans that sit externally.

Context: I bought a Liquid Cooler for my desktop, and despite the case (ATX Mid Tower) fitting 3x 120mm fans on the front, it does not leave any room, making the fans work less efficiently. I didn't want to leave the fans directly exposed, so built this case for it. It will fit any similar scenarios as long as you have 3x120mm fans exposed.

Print:
- This is a large print that won't fit on a 256x256 bed. I printed it on a 420x420 bed (Neptune 4 Max - as seen on the pictures). Can can always cut it in the slicer and glue the parts together.
- The model is a single piece, but I cut it in Orca Slicer (see pictures) at Z position 23.73. This makes the print simpler, faster and removes the need for supports. Once printed, just glue both parts together. Please note the cut outs position that are on the bottom to allow the fan's power cable to pass.

Tagi