Nozzle Wiper (PTFE)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bambu-inspired nozzle wiper
- Ocena
- 5 / 5
- Polubienia
- 58
- Pobrania
- 187
- Wydruki
- 1
- Wyświetlenia
- 2212
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Demo:
BOM:
- 6x3mm magnet x 4
- M3*8 x 2
- Roll-in T-Nut x 2
- M2*6 self-tap x 1 (up to 10mm)
- Nozzle wiper (https://www.printables.com/model/731612-bambu-nozzle-wipe)
Wiper:
This mod is compatible with the standard Bambu nozzle wiper, so if you happen to have a bambu printer they provide 2 spares that you can use. Alternatively, here's a model that you can print yourself: https://www.printables.com/model/731612-bambu-nozzle-wipe
Print settings:
Layer height: 0.2mm
Extrusion width: 0.4mm, forced
Infill percentage: 40%
Infill type: grid, gyroid, honeycomb, triangle, or cubic
Wall count: 4
Solid top/bottom layers: 5
Supports: NONE
Assembly:
Use M2 self-tap screw to attach the wiper. The extra two holes are needed if you use the original Bambu wiper. Put the magnets in the mount and the bucket, mind the polarity. It should be a light press fit and I didn't need any glue but feel free to use some if it's loose.
Use M3*8 with roll in tnuts or hammer heads to attach the mount the the 2020 extrusion.
In my setup, the wiper is mounted to the right of the z-endstop on the back:
