Raspberry Pi Camera Holder Module 3 (CM3) (Adjustable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Raspberry pi cam module 3 holder which can be fitted with screws, for everyday robotics.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 284
- Wydruki
- 5
- Wyświetlenia
- 1378
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
WHAT THIS IS:
I wanted a raspberry pi camera module 3 (or CM3) holder for my robot. Most models uploaded on printables were made for 3D printers, so I couldn't get a design to fit my robot as they were all supposed to be directly connected on the printer. So, I used a design for the cover for the camera module 3 and made an adjustable holder so that I could adjust the position of the camera vertically, as well as move it backward and forward.
DETAILS AND SPECIFICATIONS:
This model is made to be fitted with screws. IT USES M3 BOLTS AND NUTS.
ONSHAPE LINK:
I designed this model on Onshape.
The link for this model in Onshape:
camera module 3 | Main Assembly (onshape.com)