micro ATX open air PC case / small test bench for GPUs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple micro ATX test bench with PSU and SSD / HDD mount
- Ocena
- 5 / 5
- Polubienia
- 72
- Pobrania
- 305
- Wydruki
- 1
- Wyświetlenia
- 8947
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
A simple frame with pins to drop in a micro ATX mainboard. PSU mount in the bottom and 2,5" or 3,5" HDD / SSD mount on the side. Tolerances of 0,1mm are built in. Stick the parts together and some superglue in the ends. The second shortest beam is probably a bit too short. I printed it with elegoo PLA+ at 0.28mm layers and 10% gyroid infill on a Elegoo Neptune 4 Pro at 400mm/s. I had to convince some pices to fit together but good enugh for me. No supports needed with enugh cooling or slower speeds.
I am too lazy to write a build guide or to correct anything so you have to use the pictures and fix it youself. Remixes are welcome.
If someone builds this frame I would love to see it as a make.