Fan spacers for 60mm fans
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Built a Voron kit and wanted to reduce the volume of the printer when using fan filter
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 279
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Recently built a Voron from an LDO kit but wasn't happy with the noise from the fans or the amount of dust it generated.
To primarily reduce the noise I added two additional fans on the other side of the electronics enclosure and reduced the speed by half on both.
Added fan filters to reduce the dust however it created quite a high pitch noise when running. Found that Noctua created fan spacers to reduce the harsh noise of fans near obstructions so I made my own for 60x60mm fans.
There are two versions:
- 5mm → The original Noctua design thickness ones. You'll need to use longer screws and will get the best possible noise performance reduction.
- 2.5mm → You'll get around 80% of the noise reduction but you don't need to replace your screws.
I printed mine in A95 TPU. Cleaned up with an exacto blade and a lighter from strings.