1 / 3
30mm rims for 32mm 2 or 3 O ring wheels with D hub for N10 N20 N30 motor for 150g combat robot high traction wheels
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For making 32mm combat robot wheels with 2 or 3 O rings for extra traction. Hubs are super snug but dont fall off
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 171
- Wydruki
- 0
- Wyświetlenia
- 853
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (16)Powiązane
I couldnt find any good wheels for my 150g combat robot that fit my chassis, had enough traction, and stayed on the hub well. So I made one. There are 2 models one for 2 O rings and 1 for 3, size 211 works best 212 can work (from harbor freight O ring assortment). I noticed a huge difference in traction and control compared to the single O ring models I tried before making this, and I haven't had a wheel or O ring fall off yet.
