40x40 Extrusion to 16mm Cable Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are used to protect cables for the 3D printer and make things neater when running cables through 40x40…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
These are used to protect cables for the 3D printer and make things neater when running cables through 40x40 extrusion. it routes the cable in the extrusion out through flexible 16mm cable management available at a hardware store (Bunnings here in Australia). Is designed so it can slip over existing cable and if you use the split cable management you won't need to disconnect anything.
I'll be adding a few other different ones as I design them for my Felix Printer, but should work for just about any that uses 40x40 aluminium extrusion
Instructions
They will need support as I print them face down, but have a play around and your mileage may vary.
Category: 3D Printer Parts