P
Printablesjacekpom
40x40 mm cube test
a cube that will allow you to calibrate the printer for filament extrusion
- Pobrania
- 324
- Polubienia
- 6
- Ocena
- 0
Wyniki wyszukiwania: 40x40
Liczymy pasujące modele…
P
Printables3Dsquarebox
Corner Bracket 40x40x40mm
Simple functional Corner Bracket 40x40x40mm with countersunk screw holes. print in place no supports needed. i would love to see your prints
- Pobrania
- 17
- Polubienia
- 3
- Ocena
- 0
P
PrintablesFrankWL
Sortierbox 40x40x30 mm
Dieses ist eine Sortierbox für Kleinteile. Fachgröße ca. 40x40mm Höhe ca 30 mm Material: PLA Farbe: nach belieben Schichtdicke 0,2mm gezeichent mit FreeCAD 2026-02-08 Frank WL
- Pobrania
- 7
- Polubienia
- 2
- Ocena
- 0
P
Printables
40x40x20 fan
Use slow speed, .2 or .1mm layer hight for best results. Overhang settings 230% width or supports.
P
Printables
NEMA 17 motor mount for 40x40 extrusion - from Belter Ender 3
i was modding my ender 3 like every other user and i needed some way to tension a belt for my new moving system. i was thinking of how to do it and how to make it reliable like how i added belted z and never had a problem with it and it…
P
Printables
Mounting bracket 40x40x25x5
Mounting bracket 40x40x25x5 ca.: 40x40x25 PETG 0.4mm Nozzle ca 40min ca.: 3,1m Filament maybe supports, for me it worked without 50% Infill
P
Printables
Mounting bracket 3 sides-40x40x25x5
Mounting bracket 3 sides-40x40x25x5 ca.: 40x40x25 PETG 0.4mm Nozzle ca 50min ca.: 4,4m Filament no Supports 50% Infill
P
Printables
Corner Bracket 40x40x40mm
Simple functional Corner Bracket 40x40x40mm with countersunk screw holes. print in place no supports needed. i would love to see your prints
P
Printables
Noctua 40x40x20 Fan Cover
Noctua fans are extremely quiet, but their only weakness is that the fan blades are exposed. So I made a cover that can be easily placed over them. I designed it to sacrifice as little of the quietness as possible.
P
Printables
BL Touch Fan Mount 40x40mm
Adapter to mount a BL-Touch sensor on a 40x40mm Fan. For example in combination with the Petsfang Duct, to archive full bed coverage with the BL-Touch sensor. ############### BL-Touch Offset with Petsfang Duct, Petsfang Base and…
P
Printables
Sortierbox 40x40x30 mm
Dieses ist eine Sortierbox für Kleinteile. Fachgröße ca. 40x40mm Höhe ca 30 mm Material: PLA Farbe: nach belieben Schichtdicke 0,2mm gezeichent mit FreeCAD 2026-02-08 Frank WL
P
Printables
Heavy Duty Corner Mount Bracket 40x40 – Reinforced Angle Support STL
Full Description This reinforced corner mounting bracket is designed for strong 90-degree structural connections in enclosures, frames, cabinets, and custom fabrication projects. The angled reinforcement increases rigidity while…
P
Printables
Corner desk bumper 40x40x40
Corner desk bumper Printed from TPU, 0.2mm drop, 15% infill. Size: 40x40x40
P
Printables
Square End Cap for 40x40mm Profile (2mm wall)
Square End Cap for 40x40mm Profile (2mm wall) Description: A precise, durable end cap designed for standard 40x40mm square profiles with a 2mm wall thickness . Perfect for finishing furniture legs, workbenches, or DIY industrial…
P
Printables
3018 CNC 40x40 Laser Tree Module Mount (LT-40W-AA)
This is a 3018 CNC mount for the Laser Tree Laser Module (LT-40W-AA) and maybe others? There is a block on the side for the air assist hose to be secured with a cable tie. Category: DIY
P
Printables
Cable clip for 40x40 profile
I was tired of power cables dangling around my workbench (air compressor, power strip etc.) so created this clip to keep them more or less in order and tight with workbench frame. Designed for steel profile 40x40mm and single power cable…
P
Printables
Passive GPU Fan Adapter. Dual 40x40mm Fans. Template
Intended to be a Slip-Fit adapter for both the fan housing and GPU sleeve. You will need to make modifications based on the model of GPU and type of 40mm fan. Suggested modifications are access to GPU Power, resizing GPU and Fan…
P
Printables
8040 (40x40) Sim Rig Feet
Feet for raising any 8040 or 4040 aluminum extrusion sim rig high enough (10.8 cm) for a vacuum robot to go underneath.
P
Printables
Kalibrační kostka 40x40x40
Vytvořil jsem kalibrační kostku o rozměrech 40x40x40mm všechny hrany kromě těch co leží na podložce mají zaoblené hrany
P
Printables
simple Mousepad for Simrig (40x40 or 80x40 Profiles)
Its designed to be placed over a 4040 or 8040 extrusion and bolted on with 2 M8 screws. Feel free to ask any questions if theres something unclear.
P
Printables
40x40 Fan holder for HEPA filter to DIY ikea encloser
Added magnets for HEPA filter for 3D printer Flashforge Adventurer 3 Holes for button magnets 5mm x 2mm Used neodymium magnet 4mm x 1,4mm
P
Printables
Starlink Antena Adapter 40x40mm pipe
I made this adapter so the antena can be placed inside a 40x40mm pipe which is pretty easy to get.
P
Printables
Lüfterschutz 40x40mm MK1
Lüfter 40x40mm Print Settings Printer: xyzprinting da vinci 20a duo Rafts: No Supports: No Category: Robotics
P
Printables
40x40 Fan filter accessory with cable outlet
Print settings: ------------- Temperature:200.C Bed Temperature:50.C Print Speed:125mm/S Support:ON Infill:80% Infill Pattern:Cube
P
Printables
40x40mm endcap for Ender 3 Pro
Here is a 40 x 40 mm end cap for the Ender 3 Pro, being placed in place of the fixings of the original screen. I created it after purchasing a Creality touchscreen. It fits perfectly and does not move once in place. Rafts: No Supports: No…
P
Printables
Endcap for 40x40mm Type-B aluminum extrusion
Endcap for 40x40mm Type-B aluminum extrusion Source files included, includes STL, STEP and Autodesk Fusion files.
P
Printables
Powercube mount for 40x40 extrusion beams and flat surfaces
Now also added a flat surface holder Printed with a Monoprice Select Mini. If you need a customized version or want to make one yourself, please let me know in the comments. Timelapse: https://www.youtube.com/watch?v=JGoL5Z-HJKc Print…
P
Printables
fast Fan Guard 80x80x2mm or 40x40mm size can be changed in the slicer
For the Kirby Fume Extractor https://www.thingiverse.com/thing:4865478 a quick-print fan guard. Top and bottom layer to 0 layers, then adjust the infill as desired. have fun Für den Kirby Fume Extraktor…
P
Printables
CR-10 Fang for 40x40x20mm Fan Cooler with CR / BL Touch
I remixed this design so that I could mount my CR-Touch with the original metal mount.
P
Printables
fan cover 40x40 or respiration grille
This grille is more oriented to serve as a breather on the opposite side of the fan, although it serves to cover one It is printed without supports
P
Printables
Fuss_40x40_Nut8
Fuss für die 40x40 Aluprofile. Sitzt recht eng, ggf muss man je nach Filament etwas nacharbeiten. Da es mehrere 40x40 Profiltypen gibt, passt es vermutlich nicht auf alle. Passend zu Profiltyp im Foto.
P
Printables
15° angled 40x40 bracket
Depending on your use case, consider printing it on the side with supports. That way, it'll be stronger. I printer with 5 walls and 25% infill.
P
Printables
Reduction fan 30x30 to 40x40 for XCR 2 IN 1-V2
Hey there! 🙌 Today, I’ve got a practical model for those looking for a quieter print experience. This reduction part is designed to change 30mm fans to 40mm for the Dual XCR 2 IN 1-V2 extruder. I couldn't stand the noise the original fan…
P
Printables
40x40 Cable Duct for 4040 Aluminium Profile
This is the 40x40 mm version of the Cable Duct for 4040 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Also see my other models for 40x10 mm and 40x20 mm versions.
P
Printables
Sidio Crate 40x40mm Base Grid-Finity
This is a base grid for the SidioCrate half size and full size crates! This grid is 10x6 on a 40x40mm grid system that was altered off of the Gridfinity system made by Zack Freedman . The altered smaller grid size allows for more…
P
Printables
seitliche Halter für Platte für 40x40 Aluprofil
Mit den Haltern kann auf einem aus Aluschienen gebautem Tisch oder Werkbank, die Platte fixiert werden.
P
Printables
Filament Führung für 40x40 Aluprofil
Mit den 8mm Bohrungen wird der Halter auf ein 40x40 Aluprofil geschraubt. In die 9mm Bohrungen werden beidseitig PTFE-Schlauchanschlüsse (M10) eingeschraubt. Achtung, Perimeter min 4 Schichten, wegen des Gewindes.
P
Printables
40x40x20 fan
Use slow speed, .2 or .1mm layer hight for best results. Overhang settings 230% width or supports.
P
Printables
Ender 3 pro 40x40 cover and screen support
I need a new support for the screen of my ender 3 pro, I found the desing and I modified to fit my use.
P
Printables
40x40 Extrusion-Mounted Counter
You never knew you needed one. Now you know. Put all the things aside, and print! An m3x40mm bolt and an m3 hex nut are required unless you have zero expectations and could live without the numbers. The plaque is held with friction and…
P
Printables
Heat Shield with 40x40mm Air Mixer Fan
Heat Shield with 40mm Air Mixer Fan. Remix of gdramos's model on Makerworld. The added chamber heater in the K1C was heating up the side so this remix helps spread the heat. The 40mm fan aids in mixing the hot air and keeping the heat…
P
Printables
Distanz - Klotz/Puffer - AL-Profile - 40x40 - M8 Senk
Distanz - Klotz/Puffer - AL-Profile - 40x40 oder 80x40 - Dimension: 72x32 x H15 o. H20 - Für 2x M8 Senk-Schrauben - Infill 50% unter den Senk-Schrauben - Für AL-Profile: 40x40 längs oder 80x40 quer mit Nutenbreite = 60mm zip.Datei => Mit…
P
Printables
Prusa BL Touch Mount 40x40 Fan WIP
I needed a BL Touch holder for my Prusa clone. not the prettiest, but it works. Ich brauchte einen BL Touch Halter für meinen Prusa Klon. nicht der schönste, aber es funktioniert. Work in progress wird noch verbessert
P
Printables
40x40 laser module air assist nozzle set
An air-assist nozzle for 40x40mm laser modules equipped with a 20mm diameter, 8mm high removable lens and 35mm focal length. This is a set comprising of air assist nozzles with the following outlet diameters and clearance from the focus.…
P
Printables
TPU End Cap PV-Profile (40x40)
I could have bought some caps for a little money (0,33€/ea.) but those were cheap plastic caps to slip over the profile(s). According to the profile drawing (sectional cut) I redesigned a cap which is to be inserted into the profile. The…
P
Printables
Quake 3 Arena Fan Cover 40x40
Remixed with the great and intense help of Max666 , thank you! :-) Use M3 screws to fix this to your fan.
P
Printables
4040 extrusion endcap - 40x40
The endcap is held by a middle pin into the profile. The small standoffs prevent rotation. There are 5 Versions since different extrusion brands also have different hole sizes: with a pin for a 5mm hole with a pin for a 5.5mm hole with a…
P
Printables
Ender 3 v2 Mainboard / motherboard cover with 40x40x20 fan
Mainboard / motherboard cover for Ender 3 v2 with 40x40x20mm (4020) fan. You can use a 4010 as well without printer risers. Fan mounting M4, cover mounting uses stock mounting holes and hardware. Supports are optional. Pictured white…
P
Printables
Corner Bracket for 28x40 and 40x40 Wood Beams
This 3D-printed corner bracket is designed to connect two 28x40 mm and one 40x40 mm planed wooden beams at a 90-degree angle . It provides a strong and stable joint, making it ideal for home office desks, cabinets, shelves, or workbenches…
P
Printables
Numbers on square from 1 to 10 - 40x40
Needed to make some signs for new tables we have in work.
P
Printables
Bit Holder Item 40x40 8
Bit holder with optional name tags for use with item 40x40 profiles. prints in place.
P
Printables
40x40 Perler Bead Board
None the boards that my daughter had were big enough for the designs she wanted to make so it was off to find something that would just about fill my printer bed. This is a 40x40 perler bead board. Print size is 205mmx205mm so fits on…
P
Printables
Bauhaus Eurobox 60x40x40 Dust Protection
Story: I bought a 60x40x40 Eurobox at my local Bauhaus. However, they were only available with open handles. I have searched for a suitable model and printed the model by Scruffy for 60x40x32 eurobox. Unfortunately, it was a loose fit.…
P
Printables
Profil 40x40 / 4040 / M8 or no thread / Length 1 - 400
mounting profile dimensions 40x40 length 1 - 400 thread M8 or no thread
P
Printables
Cable Tie Anchors for 40x40 Profiles
For attaching cable ties to 40x40 profiles I designed this type. Printed in TPU on my MK3. Explore my other Printables: https://www.printables.com/de/@Tritschi
P
Printables
Profil 40x40 / 4040 / Covers / End caps ver. 1
End cap for 4040 profile, the first dimension is the cap height, the second is the mounting height dimensions: 40x40 diameter: 6,75 height end cap: 3, 5, 10 height mount: 3, 5, 10
P
Printables
40x40 Extrusion foot or bumper pad
Use infill density to determine stiffness of the feet, these can also be used as bumpers. I've included the step file as well, the measurements center to center of the slots was spot on. These allow the perfect amount of pressure to…
P
Printables
40x40 profile template 45 degree
This is my template for a 40x40 profile with a 45 degree angle and a center finder.
P
Printables
Bernina Chicago 7 Hoop (100x100mm & 40x40mm)
Hoops compatible with the Bernette Chicago 7 Embroidery machine. There are two sizes, 100x100 mm and 40x40 mm. I have uploaded the solidworks file if you want to make any modifications. I have also uploaded a template that you can print…
P
Printables
40x40 v slot connector
Just a brace for my ender 3 so that i can extend the frame to fit my enclosure
P
Printables
NEMA 17 motor mount for 40x40 extrusion - from Belter Ender 3
i was modding my ender 3 like every other user and i needed some way to tension a belt for my new moving system. i was thinking of how to do it and how to make it reliable like how i added belted z and never had a problem with it and it…
P
Printables
Hook Haken 30x30 and 40x40 Bosch Aluminium Profile
It would be nice if you post your make. Thank you
P
Printables
Tool Holder Item 40x40 8
Toole holder with optional name tags (https://www.printables.com/model/1205962-bit-holder-item-40x40-8) for use with item 40x40 profiles. prints in place, models with different sizes included.
P
Printables
Server Fan 40x40mm Funnel
Im Aaron 15 years old and iam an electrical engineer , soon i want to start with 3d printing but rn i dont have one. This is my first CAD model made within fusion 360.
P
Printables
calibration cubes xyz (20x20, 30x30, 40x40, 50x50)
Test cubes 20x20x20, 30x30x30, 40x40x40, 50x50x50.
P
Printables
Corner Bracket 40x40 Bosch profile Aluminium M8
I printed it without support laying on one side It would be nice if you post your make. Thank you
P
Printables
Ender 3V2-(Pro-5) Frame End caps 40x40
Ender 3V2-(Pro-5) Frame End caps 40x40 Ive designed and made 40mm by 40mm frame end caps for My E3V2 as ive alsorts going on in the frames and also have cut the originals to fit previously, so this design uses the 4 circular lugs to grab…
P
Printables
Axial cooler bracket 40x40x10 for 3d printer Ender 3 v3 se
A 40x40x10 axial cooler bracket for the Ender 3 v3 se 3D printer instead of a small axial fan.
P
Printables
Curtain hook Bosch aluminum profile 40x40 - Gardinenhaken Bosch Aluminium Profil
Link to the matching eyelets - Link zu den passenden Ösen https://www.amazon.de/dp/B09NVS978Z?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_6&th=1 It would be nice if you post your make. Thank you
P
Printables
Mounting bracket 40x40x25x5
Mounting bracket 40x40x25x5 ca.: 40x40x25 PETG 0.4mm Nozzle ca 40min ca.: 3,1m Filament maybe supports, for me it worked without 50% Infill
P
Printables
Mounting bracket 3 sides-40x40x25x5
Mounting bracket 3 sides-40x40x25x5 ca.: 40x40x25 PETG 0.4mm Nozzle ca 50min ca.: 4,4m Filament no Supports 50% Infill
P
Printables
Corner Cover for 40x40 mm Cable Channel
Motivation On cable channel corners, often cables are visible or open ends of the channel are visible. This cover gives a nice looking corner when the cable channel is visible. Print Printed with SUNLU PETG without supports Brim is…
P
Printables
90 Degree Corner Clamp (40x40 and 40x80)
90 Degree 80mm x 40mm x 15mm 90 Degree 40mm x 40mm x 15mm If you would like to support me - you can buy me a coffee :) Please try to share photo of your print <3 Check out my other models HERE and definitely go check my Etsy profile! Any…
P
Printables
Cover for 40x40 Corner Brackets for Aluminium Profile
For some 40x40mm corner brackets for aluminium profiles, there are no covers/caps available (mainly the made in china brackets), because they have a different design and no slots to mount the cap. I made this cover to slide exactly and…
P
Printables
NEW Version V2! All-in-One Calibration Cube 40x40x40
Calibration cube to test 3D printers. New V2 version included some fixes that stiffens overhang test, makes it easier to read the overhang angle and some more. Calibration Cube All-in-One Included: Letters to identify axis Calibration…
P
Printables
Endcap for PV-Profile 40x40 mm²
For my Balkonkraftwerk mounting rig I received end-caps for the PV-profiles that would inevitably collect water if mounted on the lower end - so I designed my own. They should be printed in PETG to keep their shape on hot summer days.…
P
Printables
End Cap for 40x40mm I Profile
End cap for I Profile style 40x40mm profile. Best fit when printing with PETG. Easy to mount to the profile, but grip is still good enough to make sure the cap is not falling off.
