Swivel Joint for 40x40 Aluminium Extrusion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This joint allows the connection of 40x40 Aluminium rails at different angles. I use these on my sim racing rig.
- Ocena
- 0 / 5
- Polubienia
- 111
- Pobrania
- 429
- Wydruki
- 0
- Wyświetlenia
- 2217
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
I printed the parts with Prusament PETG (PLA works just as well). The sides I printed with .15 layer height to get clean holes. For the rest I choose .2 layer height.
The pins could be inserted as an anti rotation lock. The side to side pins are used to mount the sides directly together. The side to rail pins are used to mount the parts to the rail (8mm slot).
M8 bolts and nuts (and preferably washers) are required for assembly. M8x14 or M8x16 for rail mounting. M8x35 for the joint (pivot). M8 T-nuts are required for mounting on the rail.
The spacer must be inserted in the joint to prevent crushing.