Swivel Joint for 40x40 Aluminium Extrusion
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.19 – €0.23 net (excluding VAT)
For file: PinSideToRail_0.2mm_PETG_MK3S.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.21 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 14.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This joint allows the connection of 40x40 Aluminium rails at different angles. I use these on my sim racing rig.
- Rating
- 0 / 5
- Likes
- 111
- Downloads
- 429
- Makes
- 0
- Views
- 2,217
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
I printed the parts with Prusament PETG (PLA works just as well). The sides I printed with .15 layer height to get clean holes. For the rest I choose .2 layer height.
The pins could be inserted as an anti rotation lock. The side to side pins are used to mount the sides directly together. The side to rail pins are used to mount the parts to the rail (8mm slot).
M8 bolts and nuts (and preferably washers) are required for assembly. M8x14 or M8x16 for rail mounting. M8x35 for the joint (pivot). M8 T-nuts are required for mounting on the rail.
The spacer must be inserted in the joint to prevent crushing.