Nuki Keypad 2.0 Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nuki Keypad 2.0 cover to change the color and only reveal the fingerprint sensor od the device
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 220
- Wydruki
- 1
- Wyświetlenia
- 1587
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
As I only use the fingerprint sensor of my Nuki Keypad 2.0 and it is attached to my white frontdoor, I wanted it to have a less obvious appearence.
So I designed a piece that covers the whole device except the fingerprint sensor and has cutouts inside for the area with the buttons and the LED lights. So the buttons don't get pressed by the cover and the LEDs shine through the cover as they are only covered by 0.2mm of plastic. It fits perfect and holds in place as is.
EDIT 2024-01-31:
Added a desing containing covered trigger mechanism for each button.
Print Settings
Printer Brand:
Anycubic
Printer:
Kobra 2 Pro
Rafts:
No
Supports:
No
Resolution:
0.1
Infill:
100%
Filament: Anycubic PETG White
Category: Household