1 / 2
Galilei Extruder , Tap-like CR10 / V6 Hotend — zdjęcie 1
1 / 2

Galilei Extruder , Tap-like CR10 / V6 Hotend

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hotend with Extruder based on Galileo (Orbiter 1.5 Gears + HW), Voron Tap, EVA 3

Ocena
0 / 5
Polubienia
3
Pobrania
18
Wydruki
0
Wyświetlenia
341
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Hotend with

  • Extruder based on Galileo (Orbiter 1.5 Gears + HW)
  • up to 20mm Motor (Nema 14 36mm)
  • CR10 Heatsink (the ones with ECAS)
  • PC4-M10 for Extruder
  • 40mm Fan
  • Single 5015, borrowed from EVA3
  • 2 ducts (1mm ofset in Z, depending on Nozzle (accuracy of prints/magnet installation)
  • V6 Heatblock/nozzle or MK8
  • MGN9H 50mm (nozzle as Z-probe)
  • Voron Tap Optical z-sensor
  • 4 6x3 N52 Magnets
  • Beltpath Cartesian above the rail

Bowden must be a little bit shorter to reduce pressure force

Remixed from a lot of sources:

https://github.com/jon-harper/E34M1

https://www.printables.com/de/model/230690-eva-3-inlet-for-5015-fan-parallel-to-backplate/files

https://github.com/EVA-3D/eva-main

https://github.com/VoronDesign/Voron-Tap

https://github.com/VzBoT3D/Vz-HextrudORT/

https://www.printables.com/de/model/396650-e3d-v6-and-revosix-hotend-mount-hex-nut-version

https://www.printables.com/de/model/200939-eva-3-modular-3d-printer-carriage-platform

Category: 3D Printer Extruders

Tagi