Galilei Extruder , Tap-like CR10 / V6 Hotend
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hotend with Extruder based on Galileo (Orbiter 1.5 Gears + HW), Voron Tap, EVA 3
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 18
- Makes
- 0
- Views
- 341
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hotend with
- Extruder based on Galileo (Orbiter 1.5 Gears + HW)
- up to 20mm Motor (Nema 14 36mm)
- CR10 Heatsink (the ones with ECAS)
- PC4-M10 for Extruder
- 40mm Fan
- Single 5015, borrowed from EVA3
- 2 ducts (1mm ofset in Z, depending on Nozzle (accuracy of prints/magnet installation)
- V6 Heatblock/nozzle or MK8
- MGN9H 50mm (nozzle as Z-probe)
- Voron Tap Optical z-sensor
- 4 6x3 N52 Magnets
- Beltpath Cartesian above the rail
Bowden must be a little bit shorter to reduce pressure force
Remixed from a lot of sources:
https://github.com/jon-harper/E34M1
https://www.printables.com/de/model/230690-eva-3-inlet-for-5015-fan-parallel-to-backplate/files
https://github.com/EVA-3D/eva-main
https://github.com/VoronDesign/Voron-Tap
https://github.com/VzBoT3D/Vz-HextrudORT/
https://www.printables.com/de/model/396650-e3d-v6-and-revosix-hotend-mount-hex-nut-version
https://www.printables.com/de/model/200939-eva-3-modular-3d-printer-carriage-platform
Category: 3D Printer Extruders
