Longshoot Ocarina of Time
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is a companion to the Hookshot, the Longshot, swing farther my friends! print at 300% to be scale.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 378
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
I tried to recreate the Longshot as close as possible while remaining as true to Nintendo's Original Render as much as I could. I also hollowed out the model as much as possible to reduce material cost, though do expect to use around 100-200g a roll per color if you wish to print the parts to match the game. If you have any issues please make sure to comment below or contact me on any of the socials listed on my page. The "bottom cup' is tricky, i manually generated supports only on the windows and under the very middle, prints just fine for me like that and minimal waste with supports that way, beyond that only the chains need supports if your printer is unable to print bridges.