Ender 3 S1/Pro Zero-Y Offset Mount w/5015 Fan for TriangleLabs CHCB-OT Hotend
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Zero-Y Offset Mount w/5015 Hotend Fan which has been extended to use together with TriangleLabs CHCB-OT Hotend.
- Ocena
- 0 / 5
- Polubienia
- 44
- Pobrania
- 209
- Wydruki
- 1
- Wyświetlenia
- 2058
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This model is just a simple remix of the Zero-Y Offset Mount to allow using the CR-Touch together with the TriangleLabs CHCB-OT Hotend. The CR-Touch mount has been extended 10mm so the nozzle doesn't hit the bed when probing. This model also integrates a slot for a 5015 blower fan and a reinforced right side mount as contributions from other creators.
You would have to modify the x and y offset in your firmware to let the printer know the new probe location. Set the parameters as follow:
- X offset: -46.8
- Y offset: 0
Hardware Required:
- 1x M3x8mm Flat Head Screw
- 1x M3 Locking Nut
- 1x 24V 5015 Blower Fan
- 1x JST 1.25mm Connector
Recommended Print Settings:
- Material: PLA
- Infill: 20%
- Supports: Not required
- Brim: No
The fan duct is the ModulR from Zuff which you can find for purchase here.