IKEA SAMLA dry box filament storage: bolt + nut + gasket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my first upload and also my first 3d modeling attempt.
- Ocena
- 5 / 5
- Polubienia
- 122
- Pobrania
- 666
- Wydruki
- 7
- Wyświetlenia
- 3729
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is my first upload and also my first 3d modeling attempt.
It is basically a bolt and nut couple with a small gasket. The bolt has a conical hole in the middle and is designed to perfectly fit standard 4mm PTFE tube (for 1.75mm filament).
You will need a 16mm hole (it will fit the same hole used for thing number 1233934)
I used flexible filament for the gasket.
Note: A short piece of PTFE tube is recommended inside the bolt so to reduce the drag.
Note2: you can find here a samla spool holder : https://www.thingiverse.com/thing:2399361
and a silica gel tray : https://www.thingiverse.com/thing:2236037
Print instructions
Licence: Creative Commons - Attribution Category: 3D Printer Accessories Print Settings
Printer Brand: Prusa
Printer: Prusa Mk2
Rafts: No
Supports: No
Resolution: 0.2
Infill: 50%