Ninja 400 motorcycle tank passenger hand grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To reduce the driver's fatigue during long trips.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 824
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Given the fact that the Kawasaki Ninja 400 doesn't come with a proper passenger hand grab at the back, it usually relies on the pilot to do the task, resulting in a tiring driving experience.
The Ninja 400 fuel tank doesn't align with the commercial handgrips so a solution was needed.
The item allows you to fully open and close the fuel tank cap.
It only requires a pipe of your choosing to complete the project, I used an aluminum one. The angle of the aperture is 37° from the middle (picture attached).
It's printed on PET-G at 100% infill.
Using the maximum heat allowed by your filament and the lowest printing speed of your choosing will give a stronger bond to the part.
To fix the pipe comes with a hexagonal cavity to fit standard ¼" Nuts.
You will be needing longer millimetric Allen screws (like the ones that come with the original lid).