Ninja 400 motorcycle tank passenger hand grip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
To reduce the driver's fatigue during long trips.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 34
- Makes
- 0
- Views
- 826
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Given the fact that the Kawasaki Ninja 400 doesn't come with a proper passenger hand grab at the back, it usually relies on the pilot to do the task, resulting in a tiring driving experience.
The Ninja 400 fuel tank doesn't align with the commercial handgrips so a solution was needed.
The item allows you to fully open and close the fuel tank cap.
It only requires a pipe of your choosing to complete the project, I used an aluminum one. The angle of the aperture is 37° from the middle (picture attached).
It's printed on PET-G at 100% infill.
Using the maximum heat allowed by your filament and the lowest printing speed of your choosing will give a stronger bond to the part.
To fix the pipe comes with a hexagonal cavity to fit standard ¼" Nuts.
You will be needing longer millimetric Allen screws (like the ones that come with the original lid).
