Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1kg universal filament spool holder
- Ocena
- 4,917 / 5
- Polubienia
- 1071
- Pobrania
- 8479
- Wydruki
- 137
- Wyświetlenia
- 25 631
- Oceny
- 121
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
All around best spool holder design that requires no support and mounts with common screws. It has been tested with a 1 kg spool and can be mounted in various positions. This is perfect for mounting in an enclosure, on a wall, under a shelf, or upright on a tabletop, etc.
Print Instructions: Print on the longer flat side, not the mount. Minimum 20% infill recommended, add more as needed. For easier mounting you may want to use an extended Phillips bit.
Update 1/21/22: Uploaded new STL with improved teardrops for better screw fitment. Increased file resolution for smoother curves. Fixed all open edge errors when loading in the slicer. I removed the old file after testing the new one. Thank you all for your feedback!
Follow and check out my other designs!