Chicky Soldering Helper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This device aids in soldering LED strips to wires, to another LED strip, or wire to wire.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 267
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my Chicky helper for soldering. It is capable of holding a sponge, tip cleaner, and several tips for your gun.
I have magnets that will be glued into various places on the model to help keep the piece straight. (See drawing for instructions)
You will notice a column in the middle of the body. This column will accept a penny in it so that heat is dissipated into the penny and not the plastic.
I have printed one out and went back to the drawing board for fine-tuning. I did not like the swivel hold-downs I had at first. Now everything seats with magnets and is much more friendly. It turned out nice. It is about 6 hours on the Bambu.
Layer height is .2
Infill at 20%