1 / 6
Noctua 92mm fan joiner — zdjęcie 1
1 / 6

Noctua 92mm fan joiner

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple and aesthetic item for connecting Noctua 92mm fans (and probably 80mm too).

Ocena
0 / 5
Polubienia
30
Pobrania
134
Wydruki
0
Wyświetlenia
1052
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
GNU General Public License v2.0

I needed the model for an aesthetic connection of Nocua fans, for my graphics card Noctua mod. 

It works perfectly, I reccomend printing in PETG or PCTG, PLA would be to brittle, I didn't try it though.

30% infill is more than enough, it was suprisingly strong even in 15% drafts I made. I printed it on a side with support under T crevice, but it may print ok without support on the biggest flat surface(upside down) if your printer excells in overhangs. 

Keep in mind, that this is a tight fit, you may have to force it in, as spaces in fan and/or print quality may vary. If you would like to keep the rubber corners you have to play them in with some flat tool, but its totally doable, and there is a crevice for the rubber corners in the model. There are also holes for the rubber protrusions, but I recommend to cut the excess of them(as shown in pic).

Please let me know if it fits other models of fans, I had only 92mm and 140mm Noctuas it doesn't fit the 140's, but it probably will fit in 80mm ones.

 

Tagi