Noctua 92mm fan joiner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple and aesthetic item for connecting Noctua 92mm fans (and probably 80mm too).
- Rating
- 0 / 5
- Likes
- 30
- Downloads
- 134
- Makes
- 0
- Views
- 1,052
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- GNU General Public License v2.0
I needed the model for an aesthetic connection of Nocua fans, for my graphics card Noctua mod.
It works perfectly, I reccomend printing in PETG or PCTG, PLA would be to brittle, I didn't try it though.
30% infill is more than enough, it was suprisingly strong even in 15% drafts I made. I printed it on a side with support under T crevice, but it may print ok without support on the biggest flat surface(upside down) if your printer excells in overhangs.
Keep in mind, that this is a tight fit, you may have to force it in, as spaces in fan and/or print quality may vary. If you would like to keep the rubber corners you have to play them in with some flat tool, but its totally doable, and there is a crevice for the rubber corners in the model. There are also holes for the rubber protrusions, but I recommend to cut the excess of them(as shown in pic).
Please let me know if it fits other models of fans, I had only 92mm and 140mm Noctuas it doesn't fit the 140's, but it probably will fit in 80mm ones.