1 / 12
ZIMZ "0_0" K1 Drop-in Fan Duct — zdjęcie 1
1 / 12

ZIMZ "0_0" K1 Drop-in Fan Duct

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I wanted to create a minimal / easy way for folks to improve part cooling on the k1 / k1 max.

Ocena
3,5 / 5
Polubienia
39
Pobrania
264
Wydruki
3
Wyświetlenia
3594
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Do you like all the various burners out there but are just not having luck printing the larger models?  Well, you can now have the cooling benefits with just a drop in.  See comparison photos for cooling improvements.  My model is marked with green paint.

Print Settings:

Automatic Supports (Tree preferred, see orientation from pictures I added).
Prints on K1 / K1 Max no issues (I made sure to print this model with the K1 Max).
Material: ABS / ASA or better
Layer Height: 0.2 mm or better
Infill: 15%
5 top / bottom Layers
Seam: Aligned
 

Take your time taking off the three supports and you should be fine.

To do:
Real CFD Test
Tweaks based on user feedback
 

Updates:
02/01/2024
Should fit tighter now!
It's beefier and doesn't flex as much!
Better side port angles!

Tagi