ZIMZ "0_0" K1 Drop-in Fan Duct
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted to create a minimal / easy way for folks to improve part cooling on the k1 / k1 max.
- Rating
- 3.5 / 5
- Likes
- 39
- Downloads
- 264
- Makes
- 3
- Views
- 3,594
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Do you like all the various burners out there but are just not having luck printing the larger models? Well, you can now have the cooling benefits with just a drop in. See comparison photos for cooling improvements. My model is marked with green paint.
Print Settings:
Automatic Supports (Tree preferred, see orientation from pictures I added).
Prints on K1 / K1 Max no issues (I made sure to print this model with the K1 Max).
Material: ABS / ASA or better
Layer Height: 0.2 mm or better
Infill: 15%
5 top / bottom Layers
Seam: Aligned
Take your time taking off the three supports and you should be fine.
To do:
Real CFD Test
Tweaks based on user feedback
Updates:
02/01/2024
Should fit tighter now!
It's beefier and doesn't flex as much!
Better side port angles!