1 / 3
90 deg and T-shroud fan to ductwork adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fan shroud attaches to 80 mm cooling fan. Adapts to flexible duct with 3 inch or 2 7/8 inch ID. I used this on my FNATR
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 277
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I used this to adapt the fan on my FNATR enclosure to 3 inch flexible duct. I've printed and used the 90 deg shroud. I added the t-shroud but have not printed it.