Toolless GoPro mount for Logitech Brio Webcam
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Toolless GoPro mount for Logitech Brio Webcam with original privacy cover compatibility
- Ocena
- 4,5 / 5
- Polubienia
- 15
- Pobrania
- 117
- Wydruki
- 3
- Wyświetlenia
- 965
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
Toolless GoPro mount for Logitech Brio Webcam with original privacy cover compatibility
The model's nubbin in the bottom is used to hold the webcam by the screw hole, and the brackets at the top are snapped over the webcam. A very firm toolless fit which is still compatible with the Brio's original privacy cover. And as a bonus, the cover will always be perfectly centered.
“Why didn't you just screw the tripod directly into the camera? This looks stupid”
Yes yes, I'm aware. The tripod was not my primary intention. I just used it as an example to show off the model. My use case will be to mount the camera more securely to my monitor with another 3D printed part. I also needed it to pivot, so i felt the GoPro mount was a good generic solution.
I also included the monitor bracket, if anyone's interested. It's modeled after my asus gaming monitor's profile and it's meant to be double-sided taped at the back.
All models are also available in the Fusion 360 project, if you want to make a different monitor mount or something.
For printing
The STLs are already rotated to the best orientation for printing - on its side. This way will result in the best strength not just for the part that holds the camera but also to the one that attaches to a GoPro mount. However, this orientation requires supports. Maybe a brim, depending in how confident you are with your bed adhesion :P